Outlet ✨ Mon Ster Deluxe Contour Black Vinyl Seat Base For Pride Scooters & Jazzy And Jet Power Chairs 🎉

Note: There are seat width restrictions on most scooter and power chair models. Before ordering, please read the Specs tab for further information.

If you need a new Jazzy or Jet power chair seat, then our deluxe contour vinyl seat base will work on most Jazzy and Jet models, as well as many of the standard size Pride Mobility scooters. These factory OEM replacement Jazzy seat bases are available in four colors, four depths, and seven different widths.

How to measuring your seat:

Measuring Usable Seat Depth– Refer to Figures 1 and 2

1. Position a carpenter’s square in the middle of the seat as shown.

2. Slide the square back until it just makes contact with the seat back. Keep the horizontal section of the square parallel with the floor. This will allow for contours and cushioning bolsters.

3. Measure the distance between points A and C. This measurement is the seat’s usable seat depth.

Measuring Usable Seat Width– Refer to Figure 2

1. Measure 4-1/2″ from point A to find line B-D.

2. Measure the distance between B and D. This measurement is the usable seat width.

Our power chair seat base units are genuine Pride Mobility replacement parts. Monster Scooter Parts is an authorized dealer of genuine Pride parts, so you can be sure that our Jazzy, Jet, Quantum, and Pride scooter and power chair parts are the best available.

In addition; many Pride scooters, as well as Jazzy and Jet power chairs have a maximum recommended seat size that should not be exceeded. The Specs tab above contains a list of the Pride, Jazzy and Jet power chair and scooter models with sizing restrictions and the maximum seat dimensions.

In order to ensure the correct fit, we strongly encourage you to read our Mobility Seat Measuring Guide before ordering any Pride or Jazzy replacement seat or any other seating components.

⚠ WARNING California Residents: Proposition 65 Warning

Note to Pride Mobility Scooter Owners:
Not all seat sizes will fit on all Pride Mobility scooter models. Due to the safety concerns and issues with the scooter’s center of gravity, all Pride scooters have maximum seat allowances of 22″ width and 22″ depth. This maximum should not be exceeded.

Note to Jazzy and JetPower Chair Owners:
Not all width and depth combinations will fit on all Jazzy and Jet power chair models. Due to the safety concerns and issues with the center of gravity, many power chairs have maximum seat allowances that should not be exceeded. Please refer to the table below to see if your Jazzy or Jet power chair has a maximum seat allowance.

Power Chair Model & Maximum Seat Allowance:

• Jazzy Select — 20” W x 20” D
• Jazzy Select 6– 20” W x 20” D
• Jazzy Select 6 Ultra– 20” W x 20” D
• Jazzy Select 7 — 20” W x 20” D
• Jazzy Select 14 — 20” W x 20” D
• Jazzy Select 14 XL — 22” W x 20” D
• Jazzy Select Elite — 20” W x 20” D
• Jazzy Select GT — 18” W x 20” D
• Jazzy Select HD — 24” W x 24” D
• Jazzy Select Traveler — 18” W x 16” D
• Jazzy 610 — 20” W x 20” D
• Jazzy 1100 — 20” W x 20” D
• Jazzy 1101 — 20” W x 20” D
• Jazzy 1103 — 20” W x 20” D
• Jazzy 1103 Ultra — 20” W x 20” D
• Jazzy 1104 — 20” W x 20” D
• Jazzy 1105 — 20” W x 20” D
• Jazzy 1113 — 20” W x 20” D
• Jazzy 1113 ATS — 20” W x 20” D
• Jazzy 1115 — 20” W x 20” D
• Jazzy 1120 — 20” W x 20” D
• Jazzy 1121 — 20” W x 20” D
• Jazzy 1121 HD — 22” W x 22” D
• Jazzy 1122 — 20” W x 20” D
• Jazzy 1133 — 20” W x 20” D
• Jazzy 1143 — 20” W x 20” D
• Jazzy 1143 Ultra — 20” W x 20” D
• Jazzy 1170 — 24” W x 26” D
• Jazzy 1170XL Plus — 28” W x 26” D
• Jet 1 — 18” W x 18” D
• Jet 1 HD — 20” W x 18” D
• Jet 2 — 20” W x 20” D
• Jet 2 HD — 22” W x 20” D
• Jet 3 — 20” W x 20” D
• Jet 3 Ultra — 20” W x 20” D
• Jet 7 — 20” W x 20” D
• Jet 10 — 20” W x 20” D
• Jet 10 Ultra — 20” W x 20” D